Converting a 12" B&W CRT into an X-Y Vector Oscilloscope

The Problem: Driving CRT magnetic deflection coils with audio frequencies requires high current, but inductive loads cause dangerous back-EMF and high-frequency ringing that can instantly fry a Class-D audio amplifier.

The Fix / Lesson Learned: I successfully rotated the yoke of a 12-inch monochrome CRT by 90 degrees to establish X-Y axes. To drive the coils safely using a TPA3116D2 Class-D amplifier, I had to account for the coils' very low DC resistance. I added 4-ohm high-wattage series resistors to stabilize the load presented to the amplifier. More importantly, I calculated and implemented a custom RC Zobel snubber network—placing 10nF 50V film capacitors in series with 100-ohm power resistors across the amplifier outputs. This absorbed the high-frequency inductive kickback, keeping the amplifier stable and cool while rendering perfectly crisp audio vector graphics (Lissajous figures) on the phosphor screen.



← Back to 16bit.io Home